Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Plano
Gate installation in Plano, TX runs from about $2,400 for a simple single-swing pedestrian gate up to $18,000 or more for a full HOA entrance with a heavy-duty slide operator, custom double gates, keypad entry, and safety photocells. Most driveway gate installations we complete in Plano fall between $4,800 and $9,500, and we quote the price in writing before a single bolt is turned. If you’re in Plano and need a gate that will stand up to North Texas clay soil and HOA architectural requirements, call (936) 274-8988 for a free estimate.
We know Plano’s neighborhoods, from Willow Bend to Kings Ridge to the older subdivisions along the US-75 corridor. We know the HOA approval process, the deed restrictions, and what the architectural committees actually look for. And we know what happens to a gate post when black-cotton clay goes through three years of wet/dry cycles.
Why Ironworks Gate Co. Is Plano’s Preferred Gate Installation Company
Victor Salinas founded Ironworks Gate Co. in 1984, and the company has spent over 42 years doing one thing: driveway and estate gates. That focus matters in Plano, where the housing stock across Willow Bend, Kings Ridge, and the Stonebriar-area neighborhoods was largely built between the mid-1980s and early 2000s. Thousands of automated gates in those subdivisions are now hitting the same failure window at the same time, motors, control boards, and safety loops all aging out together. A generalist handyman sees one gate problem. We see the pattern.
Every job we complete in Plano carries our 90-Day Done Right Promise in writing. If something isn’t right, we return and make it right. No paperwork, no arguing. Victor stands behind that personally. Our technicians are background-checked, uniformed, and guided by a values code we call K.E.Y.S.: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first.
When you call (936) 274-8988, a live person answers. Not a voicemail tree, not a callback queue. That matters when your gate is stuck open at 11 p.m. and your HOA has rules about unsecured driveways.
Our Gate Installation Services in Plano
Our Gate Installation team handles the full scope: driveway and estate gates, pedestrian gates, slide and swing configurations, double gates, and security gates. Each installation starts with a site visit and a written quote. Here’s what Plano homeowners and HOA boards most often ask us to install:
Driveway Gate Installation
Driveway gates in Plano’s deed-restricted subdivisions almost always require HOA architectural approval before installation begins. The committee cares about style, finish color, picket detail, and post cap design, not just function. We prepare the spec sheet and drawings the committee needs, and we match the finish exactly to the existing ironwork in the neighborhood. A typical ornamental iron driveway gate in Plano runs $4,000 to $8,500 installed, depending on width, automation, and post work.
Pedestrian Gate Installation
Pedestrian gates in Plano often share a post line with cedar privacy fencing along rear elevations or with ornamental iron along front elevations. When we install a pedestrian gate, we set the post depth to handle North Texas expansive clay, not the shallow footings many original builders used. Expect $1,800 to $3,200 for a standard pedestrian gate with a simple latch, more with keypad entry or matching ornamental details.
Sliding Gate Installation
In Plano’s HOA communities, slide gates are the workhorse for shared entrances and narrow driveways where swing gates would block the street or sidewalk. A proper slide gate installation here means deep footings for the track, a rack and pinion that runs true, and operator mounting that absorbs vibration rather than fighting it. Complete slide gate installations in Plano typically run $5,500 to $12,000, depending on gate length, operator brand, and whether we’re upgrading an existing entrance or building new.
Swing Gate Installation
Swing gates remain the most common style in Plano’s older west-side subdivisions, where cedar swing gates were originally hung on 4×4 wood posts set in shallow concrete. After decades of clay movement, many of those posts now lean visibly. We won’t mount a new swing gate on a compromised post. We replace the post, re-pour the footing at proper depth, and only then hang the gate. A complete swing gate installation with new posts in Plano starts around $3,200 and runs up to $9,000 for a double-leaf system with automation.
Double Gate Installation
Double gates carry more steel, more stress, and more ways to fail. In Plano, double gate installations are common for wide driveways on lots in Willow Bend and the larger estate-style properties feeding off West Park Boulevard. The critical piece is getting both leaves to open and close in sequence without binding, which means setting both post footings at 36 inches or deeper in this clay soil and running the operator’s travel limits precisely. A double gate installation in Plano runs $6,500 to $14,000 depending on materials, width, and automation package.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plano
We’re trained and equipped on nine gate-automation brands, so the correct fix gets made the first visit, whatever is on the driveway. In Plano, we most often install and service LiftMaster, FAAC, and BFT operators. We stock common parts locally for those brands, which cuts turnaround time for Plano customers compared to a tech who has to order everything in. If your HOA entrance currently runs a Linear operator and you want to switch brands, we’ll give you a straight recommendation based on cycle count, gate weight, and what the committee has already approved.
Common Gate Installation Problems We See in Plano Homes
After four decades of gate work, the failures we see in Plano follow predictable patterns. Here’s what we encounter most often when a Plano homeowner or HOA board calls us in:
- Posts set too shallow in expansive clay. Plano sits on Blackland Prairie soil that swells several inches in wet winters and shrinks hard in 100°F summers. A post set at 18 inches moves. One set at 36 inches with a proper concrete collar doesn’t. We see this every week in the older west Plano subdivisions.
- Installation delayed by HOA architectural review. A failing gate operator gets kept in service for months while the committee reviews the application, and that delay causes further damage to the rack and pinion and hinge post. We prepare committee-ready submittals to minimize the wait.
- New gate hung on old wood posts. The original 4×4 cedar posts in west Plano were never meant to carry an automated gate for 25 years, especially once the concrete footing cracks in the clay. Replacing the gate without replacing the post means the new gate sags within a season.
- Double gates installed without loop detectors. A single operator on a double gate with no loop detector and no keypad entry cannot tell a resident vehicle from a delivery truck. The HOA’s shared entrance backs up, safety photocells fault, and the gate opens and closes unpredictably. Proper installation includes detection from day one.
Plano’s proximity to active DART rail corridors adds another wrinkle. Communities along the Red Line and near the highway frontage roads see vibration-induced wear in rack and pinion assemblies. A slide gate operator that runs fine in Frisco may bind and wear unevenly here because the ground literally transmits rail vibration into the track. When we install in those neighborhoods, we isolate the track with a stabilized base and select an operator sized for friction loads higher than the gate weight alone suggests. That’s a detail a Dallas or Allen tech might miss simply because their development patterns don’t put gates next to active rail corridors the way Plano’s grid does.
Pricing for Gate Installation in Plano, TX
Every Plano gate installation is quoted in writing before work begins, and that quote is the price you pay. No surprises on the bill. Here’s what to expect across Plano’s market:
- Pedestrian gate installation: $1,800 to $3,200
- Single swing driveway gate, no automation: $3,200 to $5,500
- Single swing driveway gate with operator: $5,000 to $8,500
- Double swing or slide gate with operator: $6,500 to $14,000
- HOA entrance gate, full replacement with operator and detection: $8,000 to $18,000+
What moves the price in Plano specifically: HOA-required finish matching (custom powder coat colors cost more than black), post depth and footing work in clay soil (we quote 36-inch minimums here), whether the installation is a swap or a full rebuild, and operator selection. Call (936) 274-8988 for a free measure and written estimate. We also offer a Free Second Opinion on any written estimate you’ve received from another company, and a 5% discount for seniors and veterans, always.
We Also Serve Cities Near Plano
While this page focuses on Gate Installation in Plano, our crews regularly work across the north Dallas suburbs. We serve Allen, Richardson, The Colony, and Frisco from the same Dallas-Fort Worth office, with the same written pricing and the same 90-Day Done Right Promise on every job.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Plano
Yes, in virtually every Plano HOA-governed subdivision, a new driveway gate requires architectural committee approval before installation. The committee reviews finish color, picket style, post cap details, and often overall height. We prepare the spec sheets and drawings the committee needs, and we install exactly what was approved. Call (936) 274-8988 before you file, and we’ll help you get the paperwork right the first time. Estimates are free.
A safety photocell creates an invisible beam across the gate opening; when anything breaks that beam while the gate is moving, the operator stops and reverses immediately. Under Texas law and UL 325, automated gates must have an entrapment protection device. In Plano’s HOA communities, where delivery trucks and school buses enter daily, a properly placed photocell prevents the gate from closing on a vehicle or a person. We install photocells as standard on every automated gate, never as an add-on.
Footing depth in Plano must go below the active clay movement zone, so we set posts at a minimum of 36 inches with a concrete bell at the bottom. The Blackland Prairie clay swells and shrinks seasonally, and anything shallower will move within a year or two. We learned this the hard way 30 years ago; now it’s our standard on every Plano installation. Call (936) 274-8988 for a site assessment and exact footing quote.
Yes, in most cases. We stage slide gate replacements so one leaf operates while the other is removed, and we schedule the full swap during the lowest-traffic hours your HOA identifies. Temporary access control can be set up with a keypad and telephone entry unit while the new operator is being programmed. For a Plano HOA entrance, we coordinate with your management company and plan the sequence so residents are never locked out.
For high-cycle Plano HOA entrances, we recommend FAAC or BFT slide operators. Both handle continuous-duty use better than residential-grade openers, and both have local parts availability through our Dallas-Fort Worth suppliers. The right answer depends on gate weight, cycle count, and whether the entrance is near rail vibration. Call (936) 274-8988 and we’ll assess your specific gate and give you a written recommendation with pricing.
Our crew recently installed a new FAAC slide gate operator for a Willow Bend HOA entrance off West Park Boulevard. The original rack and pinion had worn unevenly after years of clay-driven post movement, so we poured new 36-inch concrete footings, re-set the hinge post, and added safety photocells before mounting the operator. The HOA’s architectural committee had already approved the finish, so we matched the existing black powder coat exactly. That’s the way it should work in Plano: approval first, proper footings, matched finish, done right.
If you’re in Plano and you need a gate installed, replaced, or repaired, call Victor Salinas and the team at Ironworks Gate Co. at (936) 274-8988. We’ll answer the phone, schedule a free measure, and give you a written price before any work starts. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Plano since 1984.