Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across The Colony
A new driveway gate in The Colony typically runs $2,800 to $9,500 installed, and most standard swing gate installations take one to two days once materials arrive. We quote every job before work starts, so you know the number before a single bolt turns. If you’re weighing a builder-grade operator that’s underperforming, or a manual gate that should have been automated years ago, call (936) 274-8988 and a live person answers, day or night.
Ironworks Gate Co. has installed, repaired, and automated gates across The Colony for years. We know the HOA expectations, the lake humidity, and the clay soil that shifts posts out of square. That local knowledge is why homeowners in neighborhoods around Lakeshore Boulevard, The Tribute, and the Cascades keep our number. Whether it’s a Gate Installation on a new build or bringing a 30-year-old iron double gate back to plumb and smooth, we do the work right and stand behind it in writing.
Why Ironworks Gate Co. Is The Colony’s Preferred Gate Installation Company
The Colony is a planned-community town. Most subdivisions here have architectural committees that want to see documentation on finish color, gate style, and hardware spec before anything gets approved. We arrive ready to document all of it, so our customers are not stuck filing incomplete paperwork with their HOA. That detail work has earned us a strong local reputation in The Colony, particularly among homeowners who have lived here twenty years and watched a gate slowly sag or bind.
We get called after other contractors have come and gone. Homeowners in The Colony tell us about gates installed on shallow footings that shifted within a season, operators that never had a proper power run, and welds that rusted through far faster than they should have. Our crews work from a Dallas-Fort Worth dispatch office and serve The Colony locally, which means a familiar technician shows up on time, uniformed, background-checked, and ready to work on the gate the first visit. Victor Salinas leads our team, and he holds every job to the same standard: if it isn’t right, we come back and make it right under our 90-Day Done Right Promise. No paperwork, no arguing.
We answer our phones 24 hours a day. Not a voicemail tree. When a gate fails in The Colony and a car can’t get out of the driveway, you get a person, not a callback queue.
Our Gate Installation Services in The Colony
Most of what we install in The Colony fits into four categories. Here’s how each one works in this town’s specific conditions.
Driveway Gate Installation in The Colony
Driveway gates in the planned communities around The Colony were often builder-grade ornamental iron, installed in the 1990s with shallow footings and no provision for automation. We handle full replacement with deeper post footings sized for Blackland Prairie clay, which swells and contracts hard here. A typical driveway gate installation in The Colony runs $3,500 to $9,500 depending on width, material, and whether we’re running new power to the location.
Swing Gate Installation in The Colony
Swing gates are the most common design we install in The Colony, and the soil is the biggest variable. If a post shifts out of plumb, the operator binds and the gate drags. We dig deeper than standard and often use a longer concrete pier on the hinge post. For a standard single swing gate with automation, expect $2,800 to $6,500. Double swing gates with dual operators run $5,000 to $12,000.
Sliding Gate Installation in The Colony
Sliding gates work well on wider drives and on properties with limited setback from the garage. They ride on a track or cantilever system that is less affected by post heave, but the track and rollers need to be spec’d for the moisture near Lewisville Lake. Untreated steel roller hardware rusts out quickly here. A sliding gate installation in The Colony runs $4,000 to $10,000 installed, depending on length and automation.
Pedestrian Gate Installation in The Colony
Many older homes in The Colony have a matching pedestrian gate beside the driveway, and those small gates often show the worst rust damage because the metal is thinner. We fabricate and install matching pedestrian gates that use the same finish and hardware spec, so the HOA documentation is simple. A pedestrian gate with a heavy-duty closer and keypad access typically runs $900 to $2,200.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in The Colony
We are trained and certified on nine gate-automation brands, and for The Colony customers that matters because builder-grade operators rarely last. We service LiftMaster, FAAC, BFT, and Linear regularly, among others, and we keep common boards, arms, and sensors on our trucks. That means when a swing gate operator in The Colony fails on a Saturday, we do not wait a week on a parts order. We diagnose the unit, confirm the fix, and usually complete the job in one visit.
One note on The Colony specifically: if your operator was installed when the house was built in the late 1990s, check the arm for rust at the mounting points. Lake-driven humidity eats those joints first.
Common Gate Installation Problems We See in The Colony Homes
- Builder-grade operators failing from corrosion. The Colony’s position on Lewisville Lake raises ambient humidity above inland DFW. Original mid-90s operators rust out at the hinge points and control boards corrode, leaving gates stuck mid-swing.
- No conduit for power runs. Many homes in The Colony built between 1985 and 2005 got a manual gate and no electrical rough-in. Homeowners converting to automatic end up with surface wiring that HOA inspectors flag. We trench and run proper underground conduit, UL-rated for the load.
- Posts shifting out of plumb on expansive clay. The Blackland Prairie soil here heaves dramatically through wet and dry cycles. A gate installed on a standard 24-inch footing shifts within a season, binding the operator and dragging the gate. We set deeper footings and use longer piers on the hinge posts.
- Safety sensors missing on older automatic gates. Many original installs in The Colony predate current UL 325 standards. A gate without photocells or a reversing edge is a serious safety hazard, especially with kids and pets near the driveway. We bring every install up to code.
Pricing for Gate Installation in The Colony, TX
Here’s what we see across The Colony for standard installations, including labor, materials, and the operator where noted:
- Pedestrian gate install: $900 - $2,200
- Single swing gate, manual: $1,800 - $4,000
- Single swing gate with automation: $2,800 - $6,500
- Double swing gate with dual operators: $5,000 - $12,000
- Sliding gate with operator: $4,000 - $10,000
- Underground power and conduit run: $1,200 - $3,500 depending on distance and obstructions
What moves the number: gate width, material thickness, whether we’re running new power, and footing depth. On The Colony’s expansive clay, we will not shorten a footing to shave a bid. The price is written and agreed before work starts. Call (936) 274-8988 for a free estimate, and ask about our $50 discount on any repair over $250.
We Also Serve Cities Near The Colony
In addition to Gate Installation in The Colony, our crews cover the surrounding corridor for gate installation and repair. That includes Frisco, Plano, Prosper, and Richardson. If you’re just outside the ZIP code, call and we’ll confirm a visit window for your area.
Serving The Colony, TX - Our Local Coverage Area
We’re based in the The Colony area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in The Colony
Yes, most The Colony subdivisions require architectural committee approval before a gate replacement or operator addition. We help by documenting the original gate style, finish color, and hardware spec so your submission is complete the first time, which keeps the project moving instead of stalling in committee. Call (936) 274-8988 and we’ll walk you through it.
In most cases yes, provided the posts are set deep enough or we re-pour them. Our crew recently installed a LiftMaster swing gate operator at a home in the Cascades at The Colony, where the builder had left a manual ornamental iron gate with no conduit for wire runs. We trenched a new line from the panel, set a deeper post footing to resist the clay heave, and added a safety photocell to meet UL 325. The gate now opens from inside the car, a keypad, or a remote.
In The Colony, the usual cause is post heave from the Blackland Prairie clay. When the soil swells after rain, the post tilts slightly and the gate binds against the operator’s force. The fix is resetting the post on a deeper footing, then re-aligning the operator arm. We see this weekly across lakeside The Colony neighborhoods. Call (936) 274-8988 and we’ll diagnose it on-site.
Yes. Current UL 325 standards require monitored safety sensors on automatic gates, including reversing edges and photocells. Many older The Colony installations lack them, which is both a code violation and a safety risk. We install sensors on every new build and can retrofit existing operators, usually in a single visit.
We do it on almost every automation job in The Colony. Most homes built in the 90s and early 2000s never had a power rough-in at the gate location. We trench a line from the panel, run rigid conduit rated for the load, and bury it to code. It’s the difference between a clean install and surface wiring that an HOA inspector will flag. Call (936) 274-8988 for a quote on the run and the operator, free.
Done Right, and Backed in Writing
If your gate in The Colony is dragging, stuck, rusting, or needs automation for the first time, call Ironworks Gate Co. at (936) 274-8988. A live person answers. We’ll schedule a visit, assess the gate and the ground it’s set in, and give you a written price before any work begins. Victor Salinas and our crews work to one standard: the 90-Day Done Right Promise. If it isn’t right, we come back and make it right. No paperwork delays, no excuses.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving The Colony and the surrounding area with driveway gate installation, repair, and automation for over 42 years.