Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for Allen Homeowners
A properly installed driveway gate in Allen runs about $2,800 to $9,500 for most homes, depending on whether you choose a single swing gate, a sliding gate, or a full double-gate with automation. We’ve been building and hanging gates in this part of Texas for over 42 years, and the call we hear most from Allen homeowners is simple: they want a gate that opens every single time, closes square, and never needs shimming or releveling two months after the Best Gate Installation in Allen, TX. That’s what Ironworks Gate Co. delivers. Victor Salinas and our crew treat every post hole, hinge, and weld like it’s going on a family member’s property. Call (936) 274-8988 and you’ll get a live person who can talk through your property and set a time to walk it with you.
What Our Gate Installation Service Includes
Every gate we install in Allen starts with a site walk and a straight conversation about how you use your driveway, who needs to get in and out, and what the gate is protecting. We set the price before work starts, in writing, and the 90-Day Done Right Promise covers the finished job. Here’s the scope of what we do.
Driveway Gate Installation
A driveway gate is the full package: the gate itself, the posts it hangs from, the hinges, the opener, and the safety edges that keep it from closing on a car or a person. In Allen we see everything from 10-foot single gates on residential streets to 24-foot estate gates on acreage off Stacy Road and Greenville Avenue. We set posts in concrete at the correct depth for Collin County’s clay soil, which moves with moisture and will shift a poorly set post within two seasons. Our installations are built level on day one and stay level because we account for that movement from the start.
Pedestrian Gate Installation
A pedestrian gate gives you a separate entry alongside the vehicle gate so you don’t have to open a 600-pound driveway gate just to walk out for the mail or let a neighbor in. We build these to match the driveway gate in style and material, which matters more than you’d think when the two sit side by side. Hinges on a pedestrian gate take real abuse because the gate gets used ten times more often than the vehicle gate, so we use heavier hardware than you’ll find at the big box stores. Our pedestrian gates swing smooth and latch firm from the day they’re hung.
Sliding Gate Installation
A sliding gate rides on a track and is the right choice when your driveway slopes upward from the street or when you don’t have room for a gate to swing inward or outward. We install these frequently in Allen neighborhoods where front setbacks are tight and a swing gate would clip a car or block the sidewalk. Sliding gates need a level track run and proper roller alignment, and we take the time to get both right on installation day, not on a callback. If the opening is wider than a single panel can span comfortably, we build and hang a cantilever or track system sized to the actual load, not an off-the-shelf kit.
Swing Gate Installation
A swing gate is the classic Texas driveway gate: it hinges on posts and opens in or out, and it’s the most cost-effective option for most Allen homes with a flat or mildly sloped driveway. The difference between a swing gate that sags in year three and one that’s still square in year twenty is the hinge post. We set every hinge post in concrete below the frost line into undisturbed soil and use through-bolted hinges rather than lag bolts wherever the post allows. We also set the gate’s stop and closer correctly the first time so the gate never slams in the wind, which is a regular complaint we hear about poor installations around Lucas and Parker.
Double Gate Installation
A double gate is two panels that meet in the middle, and it’s the best option for wider driveways from 16 to 28 feet that would put too much strain on a single swinging panel. We build both leaves on the same jig so they match exactly, then hang them with a center catch and a proper drop rod so both sides stay put when closed. Double gates need a center post or a well-set drop rod, and we’ve repaired enough sagging doubles across McKinney and Frisco to know that skipping that detail ruins the whole installation. When automation is part of the plan, we install a synchronized opener system so both leaves open and close together without one side lagging.
Security Gate Installation
A security gate is built differently from a decorative gate: heavier steel, reinforced frame, tamper-resistant hinges, and a latching system that can’t be lifted off its posts. Allen homeowners with a detached garage, a long driveway, or a side yard that opens to an alley ask us for this type of install regularly. We also add security considerations like anti-lift brackets and an opener with a battery backup so the gate still operates during a power outage. For homes that need controlled access, we can tie the gate into a keypad, intercom, or vehicle sensor system at installation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
We’re certified to install and service automation from LiftMaster, FAAC, BFT, and Linear, among others. LiftMaster is the brand we hang most often on residential driveways in Allen because the motors are quiet, the delivery lead times are dependable, and parts support is excellent. We stock LiftMaster receiver boards, safety sensors, and remote transmitters on the truck so a repair or install doesn’t stall over a missing part.
FAAC and BFT are the names we tend to recommend on heavier estate gates and commercial-grade installations. These are Italian-built hydraulic and electromechanical operators that run for decades when installed and maintained correctly, and we’ve been working on them long enough to know their quirks and how to avoid them. Linear we often pair with access control systems where a homeowner or small HOA wants keypad entry and multiple remote codes. Whether you have one of those four brands or a Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule already on your property, we can talk through your options and make the right call for the gate you’re buying.
Signs You Need Gate Installation Right Now
- Your gate leans and the posts wobble. A gate that leans means a post that was not set deep enough or in enough concrete, and it won’t fix itself. The gate will keep sagging, the hinges will wear unevenly, and the opener will eventually burn out fighting the bind.
- The gate drags on the ground halfway through its stroke. This is a clear sign the hinges or the post have shifted, or the gate itself was hung too heavy for its frame. Ignoring it means replacing hinges, then posts, then eventually the whole gate when the damage compounds.
- You’re propping the gate open with a rock or a bungee cord. If the gate won’t stay open or won’t stay closed on its own, it’s no longer a gate, it’s a heavy hazard. Every month that goes by adds strain to the hinges, the post, and the opener if you have one.
- You keep hitting the same repair over and over. When you’re on your third hinge replacement or second opener in five years, the problem is the installation, not the parts. A new gate installed square will cost you less over ten years than nursing the old one along.
- Your gate is 20 years old and the frame is cracking at the welds. Metal fatigue is real, especially on gates that have been riding on misaligned hinges for years. A cracked weld is a structural failure waiting to happen, and patching it buys months, not years.
Our Gate Installation Process - Step by Step
- 1
We walk the site with you. We come to your Allen home and look at the driveway grade, the existing fence line, the location of utilities, and the spot where the gate will live. We ask how you’ll use the gate, how many cars come and go, and whether you want a keypad, intercom, or app control. We take measurements and put the full price in writing before anything else happens.
- 2
We build or order your gate to spec. If you want a custom gate, we fabricate it in our shop to the exact dimensions and weight we calculated at the site walk. If you’re using a premanufactured gate, we order it from a supplier we trust and inspect it before it goes on the truck. The gate is built for your opening and your soil, not for a generic driveway somewhere else.
- 3
We set the posts and hang the gate. This is the part that matters most. We dig below the frost line, set posts in concrete, and leave the concrete to cure before we hang weight on it. Then we hang the gate, check the gap, check the level, and shim only where the driveway surface actually calls for it. The gate should swing or slide through its full range of motion without binding or dragging.
- 4
We install the opener and safety equipment. The operator gets mounted according to the manufacturer’s spec, and we wire it to code. We install photoelectric or pressure safety edges where the gate crosses the driveway so it reverses if something is in the way. We program remotes, keypads, and any app access while you watch, and we test the full cycle multiple times.
- 5
We walk you through it and hand you the warranty. Before we leave, we show you how the manual release works, how to change a remote battery, and what the gate should sound like when it’s running right. You sign off that the job is done, and we hand you the written 90-Day Done Right Promise. If anything isn’t right, we come back and make it right. That’s the deal.
How Much Does Gate Installation Cost in Allen?
A single swing gate with standard iron panels and no automation typically runs $2,800 to $5,500 installed in Allen. Add an opener and you’re usually at $4,800 to $8,500. A double gate with automation spans $6,000 to $9,500 depending on width, weight, and the operator brand. Sliding gates tend to land between $5,000 and $9,000 because the track, cantilever hardware, and heavier frame add cost. These ranges hold for our recent work in Allen, McKinney, Plano Gate Installation, and the surrounding area.
What moves the price: driveway width and gate size, whether the gate is custom welded or a stock panel, the automation brand you choose, whether you want a keypad or intercom, and the condition of the ground where posts get set. Costs to watch for: any bid that doesn’t include post-setting and concrete, any bid that excludes safety edges or sensors, and any bid that price-floors you over the phone without seeing the driveway. You avoid overpaying by getting a written line-item estimate that lists the gate, the posts, the hardware, the concrete, the opener, and the labor separately. That’s exactly what we give every Allen homeowner before work starts, and the price we quote is the price you pay. A free estimate is a phone call away at (936) 274-8988.
Gate Installation Near Allen - Our Service Area
We install gates throughout Allen and the neighboring communities we’ve worked for decades. Regular calls come from homeowners in Plano, Fairview, Lucas, Parker, McKinney, Murphy, Frisco, Richardson, Wylie, Princeton, and Sachse. For a full Gate Installation in Allen project, we schedule the site walk within a few days, and most installations in Allen are completed in one visit once the gate and materials are on hand. You can always reach us at the same number, day or night.
Serving Allen, TX - Our Local Coverage Area
We’re based in the Allen area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Allen
Allen Gate Installation is the full process of setting the posts, hanging the gate, and installing any opener, keypad, or safety equipment so the gate operates correctly from the first day. It includes digging and pouring the post footings, mounting the hinges and hardware, hanging the gate level and square, and testing the full opening cycle. A proper installation also takes your driveway grade, soil conditions, and how the gate will be used into account before any concrete gets poured. When we finish an installation in Allen, the gate is ready to use that day.
Most residential gate installations in Allen are completed in one day on site once the materials are ready, which is typically one to three weeks after the site walk and order. Custom welded gates add a few days to a few weeks of fabrication time in our shop before the on-site day happens. If you’re ordering a premanufactured gate, the lead time depends on the supplier, but we tell you the schedule before we take a deposit. The on-site work itself, including setting posts and letting the concrete cure enough to hang the gate, usually runs four to eight hours.
In Allen, a standard single swing gate without automation runs $2,800 to $5,500, and adding an opener brings most jobs to $4,800 to $8,500. A double gate with automation runs $6,000 to $9,500, and a sliding gate typically lands between $5,000 and $9,000. The spread depends on gate size, material, automation brand, and site conditions. We give you a written line-item estimate before any work begins so the number you see is the number you pay. Call (936) 274-8988 for a free estimate on your specific driveway.
Yes, we install and service LiftMaster gate openers regularly, and we stock LiftMaster parts on our trucks so a new installation isn’t delayed waiting on delivery. LiftMaster is the most common residential opener we hang in Allen because the motors run quietly and the brand’s residential support is dependable. We also work with FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so whatever opener you choose or already own, we can work with it. If you’re deciding between brands, we’ll tell you honestly what we’d put on our own driveway.
If a gate has failed and left your driveway open or your vehicles trapped, we treat it as an Emergency Gate Installation in Allen, TX priority and will send a technician as soon as one is available. We answer the phone live 24 hours a day, 7 days a week, so you can reach a real person at (936) 274-8988 any time. For a new installation where no gate exists yet, we schedule the site walk at the earliest opening and build from there. Most emergency temporary openings can be restored the same day so your property is secure while a permanent gate is built.
Every gate installation is covered by our written 90-Day Done Right Promise, the Keystone Standard we’ve stood behind for over 42 years. If anything about the installation isn’t right within the first 90 days, we come back and make it right, no paperwork and no arguing. The gate and operator manufacturers also carry their own warranties, and we handle the paperwork so you don’t have to chase a manufacturer. We are a company that plans to be in Allen for the next forty years, and our warranty reflects that.
Clear the area around the driveway opening so we have room to work, and move any cars that are normally parked in the path. If you have a sprinkler system, flag the sprinkler heads near the gate area so we don’t strike them during post-hole digging. It also helps to have your HOA approval in hand if your Allen neighborhood requires design review for a new gate, since some communities do. During the site walk we’ll point out anything else specific to your property, including any utility lines we’ll need to locate before digging.
Schedule Your Gate Installation Service in Allen Today
If you’ve been thinking about a new driveway gate, now is the time to get a firm number and a clear plan. Call (936) 274-8988 and you’ll reach a live person who can schedule your free site walk and line-item estimate. Every installation is priced before work begins and covered by our 90-Day Done Right Promise. Ironworks Gate Co. has been putting gates in the ground across Allen and Collin County for over 42 years, and we’d be glad to put one in for you.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Allen since 1984.