Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Frisco
A new driveway gate installation in Frisco typically runs $4,800 to $14,500 for an ornamental iron double swing gate with automation, and most of that cost is in the posts, the operator, and the power run. If you’re in a Stonebriar, Starwood, or Plantation Resort home where the original gate is now 15 to 20 years old, we can usually get your new gate measured, fabricated, installed, and automated within two to three weeks of the first call. We’re the gate company Frisco homeowners call when they want it done once, with a written guarantee behind it. Call (936) 274-8988 and you’ll get a live person, not a voicemail.
Why Ironworks Gate Co. Is Frisco’s Preferred Gate Installation Company
We’ve been at this trade since 1984, and the work we do in Frisco is the work we’re proudest of. This city grew faster than almost any other in Texas, and that growth left behind tens of thousands of gates that were installed quickly, with builder-grade operators and hardware that was never meant to last two decades. We know those gates. We know the neighborhoods, the HOAs, the soil, and the specific operator models that show up street after street in 75033, 75034, and 75035.
Our owner, Victor Salinas, has built this company on a simple rule: the 400th job gets the same care as the first. Every gate installation in Frisco is protected by our 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no arguing. You’ll also get background-checked, uniformed technicians who treat your property like their own mother’s house. That’s the K.E.Y.S. standard: Krafted right, Every time, Your home first, Standing behind it.
When you call about a Gate Installation in Frisco, you talk to a person. Not a phone tree. Not a callback queue. We answer live, 24 hours a day, 7 days a week, and we’ll give you a straight answer about your project and a written estimate before a single bolt is turned.
Our Gate Installation Services in Frisco
We install every kind of gate a Frisco home could need, from a modest side-yard pedestrian gate to a full double driveway swing gate with automation, keypads, and safety edges. Here’s what that looks like in practice.
Driveway Gate Installation
Most Frisco homes in HOA-governed communities like Starwood or The Trails already have a driveway gate, but plenty are manual, worn, or sized for a two-car driveway that now sees four cars and a golf cart. We measure, engineer the post footings for Blackland Prairie clay, fabricate the gate to match your HOA’s finish requirements, and install the operator, keypad, and safety photocells. A typical ornamental iron double driveway gate in Frisco runs $6,500 to $14,500 installed with automation, depending on width, finish, and whether we’re reusing existing posts or setting new ones.
Swing Gate Installation
Swing gates are the most common style in Frisco’s 1998 to 2015 neighborhoods, and they fail in predictable ways. The hinge post leans, the panel sags, the operator strains against the misalignment and burns out. We don’t just hang a new gate on old hardware. We correct the post, set new hinges, and install an operator sized for the actual weight of the gate so the cycle is smooth from day one. Expect $4,800 to $9,500 for a single swing gate with automation, including post work.
Security Gate Installation
Some Frisco homeowners want more than curb appeal. They want controlled access, a gate that won’t be forced, and a record of who came through. We install security-focused driveway gates with reinforced frame construction, commercial-grade operators, keypads, vehicle detection loops, and optional telephone-entry or app-based access control. In Frisco’s gated communities, we also do finish matching so a security upgrade doesn’t stick out like an afterthought. Security gate packages in Frisco start around $7,500 and run up to $18,000 for full access control integration.
Pedestrian Gate Installation
Side-yard pedestrian gates and courtyard gates are everywhere in Frisco’s master-planned communities, and they see daily cycles far higher than the driveway gate. We install them with the same care as a driveway gate: proper post depth below the clay heave zone, self-closing hinges where required, and a latch that won’t sag or stick. A pedestrian gate with a matching finish and keyed or electronic entry typically runs $1,800 to $4,200 in Frisco.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Frisco
We install and service automation equipment from every major opener brand you’re likely to find on a Frisco property. We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Frisco customers specifically, we stock the common LiftMaster and FAAC parts and accessories so a repair or replacement doesn’t turn into a two-week parts wait. Whatever is on your driveway, we’ve seen it, opened it, and fixed it before.
We also carry a full range of safety edges, photocells, keypads, and telephone-entry units, so an installation isn’t limited to what’s left on the truck. You get the right equipment for your gate and your HOA, not whatever we happen to have in stock.
Common Gate Installation Problems We See in Frisco Homes
Frisco is different from Plano or Allen, and the difference is in the building cycle. Here are the problems we see most often on brand-new gate installations and on the existing gates they’re replacing.
- Builder-grade operators that fail early. In early-2000s communities like Stonebriar, builders often used the least expensive operator that would pass a final walkthrough. That operator was never rated for Frisco’s freeze-thaw cycles, and many of them died young, leaving a perfectly good gate with a dead motor. We replace them with correctly sized, weather-sealed operators from LiftMaster or FAAC.
- Missing or undersized conduit runs. The original builds rarely left a conduit stub from the house to the gate post. That means any new installation has to either run new underground conduit or, worse, surface-mount the power and control wiring, which most HOAs won’t approve. We trench and install proper conduit, and we locate and protect the power run before the gate goes in.
- Post movement from Blackland Prairie clay. Frisco sits on expansive clay that swells after spring rain and shrinks in summer drought. That seasonal heave torques posts out of plumb. A new gate installed on undersized posts or shallow footings will bind within a year. Our installations use deeper footings and heavier post sections to resist that cycle.
- HOA finish mismatch. Your new gate has to match the original finish, or the architectural committee sends you back to the drawing board. All of our Frisco installations include a powder-coat or paint match to the HOA’s approved palette, documented for submittal.
Pricing for Gate Installation in Frisco, TX
Here are the honest numbers for Frisco’s market, as of this season. A single ornamental iron swing gate with automation, new posts footed for clay, and a keypad runs $4,800 to $9,500. A double driveway swing gate runs $6,500 to $14,500. A sliding gate, less common in Frisco but right for some long driveways, runs $7,000 to $15,000. A pedestrian gate alone is $1,800 to $4,200. Add a vehicle detection loop and telephone-entry access control to any of these and you’re adding $900 to $2,800.
What moves the number is the post work, the power run distance, and the gate’s dimensions and finish. We quote the whole job before any work starts, in writing, and we don’t change the number unless you change the scope. Estimates are free. Call (936) 274-8988 and ask for a measure-and-quote.
We Also Serve Cities Near Frisco
If you’re in Prosper, The Colony, Plano, or Allen, we serve those communities too, with the same written guarantee and the same live-answer phone line. For more about our work across the wider metro, see our Frisco service area page. And if you’re comparing companies, ask any of them one question: will they put their workmanship guarantee in writing?
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Frisco
Yes, in most cases. The gate itself may be fine; what’s missing is the automation, the power run, and the safety equipment. We install swing-arm operators from LiftMaster or FAAC on existing manual gates all the time, provided the posts are sound and the gate isn’t sagging. In an HOA community, you’ll need architectural review sign-off, and we’ll supply the spec sheet and finish documentation to support your submittal. Call (936) 274-8988 and we’ll take a look and give you a written price.
Almost certainly yes. Frisco’s master-planned communities all carry architectural standards, and a new gate that deviates from the approved style, finish, or height will be flagged. We handle the paperwork requirements by providing dimensional drawings, finish samples, and operator specifications. The approval is yours to submit, but we’ve supported enough Frisco HOAs, including Stonebriar and Starwood, to know exactly what the committees want to see.
Not as your only power source. Frisco’s winter storms, like what we saw in February 2021, bring days of heavy cloud and freezing precipitation, and a solar-charged battery loses capacity in the cold. A solar opener on a light pedestrian gate can work, but for a driveway gate that must cycle every time a car leaves, an AC-powered operator with the solar panel as a supplement is the dependable choice. We’ll recommend the right configuration based on the gate’s weight, the cycles per day, and the shade on your property.
Usually the panel is fine and the post is the problem. A sagging gate in Frisco is almost always a hinge post that has leaned out of plumb from clay heave, or a hinge that has worn on one side. If the operator is dead, that’s the symptom, not the cause. We correct the post, reset the hinges, and then install the new operator. Replacing the whole gate without fixing the post just means you’ll sag again in two years. The exception is when the panel itself is rusted through or the frame is cracked from a vehicle strike, in which case a new gate is the honest call.
Yes, and they’re non-negotiable. Every automatic gate we install in Frisco includes safety photocells to detect a vehicle or a child in the gate’s path, a reversing edge that stops and reverses on contact, and a manual release so the gate can be opened by hand in a power outage. The current standard we follow is UL 325, and every installation leaves our shop compliant. We also verify the operator’s force settings on site, every single time. Safety gear isn’t an upgrade; it’s the installation. Call (936) 274-8988 for a free estimate on a gate that’s done right.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Frisco with honest gate installation and repair since 1984.