Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Plano
A gate motor or opener rebuild in Plano typically runs $550-$1,200 for the mechanical work itself, and the job is usually finished in a single visit after the HOA approval step clears. If the post footing has shifted in the clay, count on another $400-$800 to re-pour and square the post before the new operator gets mounted. We know Plano’s gates, Plano’s HOAs, and Plano’s soil. Call (936) 274-8988 and we’ll give you a straight answer on all three.
Serving Plano means knowing the neighborhoods west and east of US-75, from Willow Bend to Kings Ridge to the Stonebriar corridor. Every one of these subdivisions carries its own deed restrictions and architectural guidelines. We have worked inside enough of them to know what the management company will approve before a single tool is lifted. That saves you the headache of a rejected variance and a gate sitting dead for another three weeks.
Why Ironworks Gate Co. Is Plano’s Preferred Gate Motor & Opener Company
We’re a gate company, not a generalist. That distinction matters when your Willow Bend swing gate motor burns out and the hinge post has leaned because the black-cotton clay underneath cracked the footing. A general repair outfit will swap the motor and leave. The gate binds again by spring. Our Gate Motor & Opener team reads the whole picture: the operator, the post, the rack, the loop detector, the HOA finish requirement.
Victor Salinas leads the Ironworks Gate Co. crew. He has spent his working life around welded steel and gate operators, and the technicians who ride with him are background-checked and uniformed, trained on nine automation brands. Plano homeowners call us because the last contractor left them a gate that worked for six months and a voicemail nobody answered. We answer the phone. A live person, 24 hours a day, every day. No answering service.
Our Gate Motor & Opener Services in Plano
Motor Installation
Replacing a failed operator on a Plano driveway gate starts with the approval question. HOA architectural guidelines in neighborhoods like Kings Ridge and Stonebriar-area subdivisions dictate finish color, picket style, and post cap details, and those rules extend to the operator arm and control box. We quote only what your community allows, file the variance paperwork when needed, and mount the new motor to match the approved spec. A standard swing gate operator installation runs $600-$1,400, depending on gate weight and leaf length.
Motor Repair
Most motor failures we see in Plano have a mechanical root cause. The control board gets blamed, but the real culprit is usually a hinge post that moved in the clay and put constant load on the motor until the gearbox gave out. We diagnose the full system before we touch the operator. Motor repair work in Plano typically falls between $180 and $480 for the electrical and mechanical components on top of any post or footing work the gate needs.
Linear Motor
Linear operators, including Linear brand units and linear-screw designs from FAAC and BFT, show up on many of the slide gates in Plano’s newer east-side subdivisions. A linear or screw-drive motor repair in Plano runs $350-$700 on average. The drive screw itself wears unevenly when the gate track shifts from soil movement, so we always check run tolerance and track alignment before replacing the motor. That’s the difference between a fix and a repeat call.
Slide Motor
Slide gates on Plano’s wider properties and shared HOA entry points take a beating from the climate. The track shifts on expansive clay, the rack misaligns, the gearbox grinds itself apart. A slide motor replacement in Plano runs $900-$2,200 with the track and rack adjustment included in our quote. If the concrete track bed has cracked, we’ll tell you what that costs before any work begins, not after.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plano
We’re trained and equipped on nine gate-automation brands, and the three we install and repair most often in Plano are LiftMaster, FAAC, and BFT. LiftMaster operators show up on thousands of HOA entry gates and driveway swing gates across Collin County. BFT and FAAC units are common on the higher-end estate properties in west Plano. We stock common control boards, remotes, loop detectors, and safety edges locally so a Plano repair doesn’t stall waiting on a part from two states over.
Common Gate Motor & Opener Problems We See in Plano Homes
- Burnt-out swing motors on leaning posts. The 4×4 wood posts set in shallow concrete footings on Plano’s older west-side properties crack in the black-cotton clay, the post leans, the gate leaf drags, and the operator burns out. Fixing the motor without re-pouring the footing means replacing the motor again next season.
- HOA approval delays. A resident submits a request for a replacement operator in a non-matching finish. The management company takes two weeks to review it. The variance is denied, the owner waits another month, and the gate stays dead. We handle the paperwork up front so the approved part goes in the first time.
- Slide gates binding mid-travel. The clay under the track swells in spring, shrinks in August, and the rack and pinion skip or bind. The operator keeps running, but the gearbox takes the abuse until it fails. We check track elevation and rack alignment on every slide gate repair.
- Intercom and loop detector failures on shared entry systems. Plano HOA entry gates often fail to open for residents even though the motor is fine. The loop detector wiring under the driveway shifted with the soil, or the intercom integration lost its programming. We chase the signal path, not just the motor.
Pricing for Gate Motor & Opener in Plano, TX
Here’s what Plano homeowners should expect to pay. A swing gate motor replacement runs $550-$1,200 for the operator and labor. A slide gate motor runs $900-$2,200 with track adjustment included. Control board replacement runs $250-$600. Intercom and loop detector repair on shared entry systems runs $300-$800. Battery backup installation runs $400-$900 depending on the operator and the required run time. Every price is quoted and agreed before any work starts, in writing. No surprise line items on the invoice. Call (936) 274-8988 for a free estimate.
We Also Serve Cities Near Plano
Our crews serve Plano and the surrounding North Texas communities along US-75 and the Dallas North Tollway. That includes Allen, Richardson, The Colony, and Frisco. HOA requirements and soil conditions vary by neighborhood in each city, so we adjust the same way we do in Plano: approval first, then the work.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Plano
In most Plano HOA-governed subdivisions, yes, you need architectural approval before replacing the visible portions of a gate operator, including the arm, the control box, and any conduit. Willow Bend, Kings Ridge, and most Stonebriar-area communities enforce finish color and style guidelines. Our team files the variance paperwork for you and orders parts that match the approved specification. Call (936) 274-8988 and we’ll check your community’s rules before the first visit.
Because the motor was replaced without fixing the post. Plano sits on expansive black-cotton clay that swells and shrinks with the wet/dry seasons, and that movement leans hinge posts and throws the gate leaf out of alignment. The misaligned gate loads the operator continuously until the next motor fails. We diagnose the post before we touch the motor, and we quote the footing work up front. Call (936) 274-8988 for a free inspection.
A shared entry gate with a properly sized battery backup system will open and close for 12-24 hours of typical use after the power drops. Plano’s February 2021 freeze proved that exposed control boxes and seals fail under prolonged sub-teens temperatures, so we recommend sealed, weather-rated enclosures and battery warmers on any HOA entry installation. We install and service battery backup systems on all nine brands we carry.
Yes, in most cases. We re-level the track, re-set the rack, and re-align the gate travel before adjusting the operator limits. If the concrete track bed itself has cracked or heaved, we’ll quote the slab repair and hold the gate open until it’s done right. The alternative is watching the new gearbox grind itself apart over two summers. Call (936) 274-8988 and we’ll send a tech to measure it.
Yes. We file variance requests and architectural approval paperwork with Plano HOA management companies as part of the job. We take photos, document the existing finish and hardware, and submit the package in the format your management company expects. That keeps your gate from sitting dead for weeks while the board reviews a non-conforming part. Call (936) 274-8988 and we’ll start the paperwork the same day.
Do Not Let a Dead Gate Sit Through Another Plano Season
Every week a gate stays down in Plano, the summer heat bakes the control board a little harder and the winter rain works a little deeper into the cracked footing. The sooner we look at it, the less the repair costs. Call (936) 274-8988 for a free estimate. A live person answers, day or night. We’ll give you a straight price before any work starts, and we’ll stand behind it in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Plano and the North Texas metro.