Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Wylie
Gate parts and welding repair in Wylie usually costs between $145 and $480 for a hinge replacement, $220 to $680 for a post reset, and $190 to $850 for custom welding work, depending on what has actually failed. Most calls we take from Wylie homeowners come down to one of two things: a post that has moved, or a weld that has finally let go. Our Gate Parts & Welding team serves the entire 75098 zip code, including Woodbridge and Bozman Farm, and we answer the phone 24 hours a day. Call (936) 274-8988 and a live person will pick up.
We have spent years working on Wylie gates, and the pattern is consistent. This city’s clay soil moves more than any other single factor, and it moves posts. The gate that worked fine for fifteen years starts dragging, then the opener starts binding, then a hinge shears. We see the full sequence on a regular basis.
Why Ironworks Gate Co. Is Wylie’s Preferred Gate Parts & Welding Company
Wylie homeowners call us because we do not guess. We have rebuilt enough gates in this city to know exactly what the soil under Woodbridge, Bozman Farm, and the neighborhoods off Brown Street does to a steel hinge post over ten or fifteen years. When we quote a repair, we are quoting the repair that will actually hold, not the repair that will get us paid today and called back next spring.
Every technician who works in Wylie is background-checked, uniformed, and trained on the full scope of gate work, from cutting and welding to programming LiftMaster and FAAC operators. Victor Salinas, our owner, set the standard 42 years ago and it has not moved: do the job right, quote the price before any work begins, and stand behind it in writing. Our 90-Day Done Right Promise covers every repair we make in Wylie, no paperwork, no arguing. If it is not right, we come back and make it right.
We offer a free second opinion on any written estimate, $50 off any repair over $250, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. Those offers apply in Wylie the same as everywhere else we work.
Our Gate Parts & Welding Services in Wylie
Hinge Replacement
Hinge replacement in Wylie is rarely just a hinge swap. On a 2000s-era steel gate in Woodbridge or Bozman Farm, the hinge is usually the first visible failure, but the post behind it has almost always moved. We replace hinges with heavier-gauge steel than what came on the original build, and we check post plumb before we tighten anything. A typical hinge replacement here runs $145 to $480 depending on gate weight and whether we are working with weld-on plate hinges or bolt-on barrel hinges.
Post Replacement
This is the single most common job we do in Wylie. The 4×4 wood gate posts set during the early-2000s building boom were poured in small footings, and Collin County’s Houston Black clay has been working on them ever since. We regularly find posts 2 to 4 inches out of plumb that are not rotted, just heaved. We reset them in a 12-inch concrete footing, set below the frost line, and re-hang the gate to match the corrected arc. Post replacement in Wylie typically runs $220 to $680, including concrete and hardware.
Rail Repair
Slide gates on Wylie’s west side take a beating from clay heave. When a post shifts, the rail no longer lines up with the wheels, and the gate starts riding the rack and pinion at an angle. That strips teeth and bends rail sections. We straighten or replace rail, re-set the wheels, and re-align the drive rack so the operator is not fighting the gate. Rail repair here runs $180 to $520 depending on rail length and whether the rack itself needs replacement.
Custom Welding
Ornamental steel gates from the early 2000s, the ones HOA-governed communities like Woodbridge and Bozman Farm approved, are now showing weld fatigue at the stressed corners. We weld cracked frames, rebuild hinge mounting plates, and fabricate replacement sections that match the existing finish. Our welding is done by the same hands that have been running a torch since 1984, and we match HOA finish requirements on every Wylie job. Custom welding in Wylie runs $190 to $850 depending on the extent of the fabrication.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Common Gate Parts & Welding Problems We See in Wylie Homes
- Post lean from clay heave: Wylie sits on Houston Black clay, a shrink-swell soil that loses volume in summer droughts and re-expands violently with rain. Posts set in small footings lean 2 to 4 inches out of plumb, which is why hinge replacement alone often fails. The post has to be reset first.
- Gate drag and stripped rack teeth: When a slide gate’s post shifts, the gate’s weight lands on the rack and pinion at a bad angle. That puts a load on the drive gears the opener was never designed to handle, and the teeth strip within a season or two. We fix the post and the rack together.
- Weld fatigue on early-2000s ornamental gates: HOA-approved steel gates in Woodbridge and Bozman Farm have been sagging for years. Somebody adjusted them, maybe twice, maybe four times. Each adjustment put the welds at the hinge post under a different load path. Eventually the metal tears. We repair the welds after the post is corrected.
- Obsolete control boards on first-generation openers: Power surges and 100°F-plus summers in Wylie burn out control boards on original LiftMaster and FAAC operators. When there is no direct replacement part, retrofitting parts onto a 20-year-old board is often more expensive than replacing the operator. We will tell you honestly which one makes sense.
Pricing for Gate Parts & Welding in Wylie, TX
Here are real numbers from our Wylie work. Hinge replacement runs $145 to $480. Post replacement with new footing runs $220 to $680. Rail repair runs $180 to $520. Custom welding runs $190 to $850. A full post reset plus hinge replacement and repainting on a standard 2000s-era Wylie drive gate usually lands between $500 and $900.
What moves the price is gate weight, whether the post has to come out, and how much custom fabrication is involved. The price we quote is the price you pay, agreed before a single bolt is turned. Estimates are free. Call (936) 274-8988 for an exact quote on your Wylie gate.
We Also Serve Cities Near Wylie
While this page focuses on Wylie and the 75098 zip code, our crews work across the northeast Dallas suburbs. We serve homeowners in Sachse, Allen, Richardson, and Princeton with the same Gate Parts & Welding expertise and the same 90-Day Done Right Promise. Dispatch is coordinated from our Dallas-Fort Worth office, and Wylie is on our regular route.
Serving Wylie, TX - Our Local Coverage Area
We’re based in the Wylie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Wylie
Because the hinge is not the real problem. The post is. Wylie’s Houston Black clay heaves and contracts seasonally, and 4×4 posts set in the early-2000s without oversize footings have leaned 2 to 4 inches out of plumb. New hinges on a leaning post will sag again within months. We reset the post first, then re-hang the gate. Call (936) 274-8988 and we will tell you what your gate actually needs.
In most cases, yes. We carry retrofit safety kits with UL 325-compliant photocells, edge sensors, and current control boards compatible with older LiftMaster, FAAC, and BFT operators. When the original board is obsolete and no direct replacement exists, retrofitting usually costs more than a new operator. We will quote both honestly and let you decide. Free estimates at (936) 274-8988.
Yes. It is the most common repair we make in Wylie. We dig out the old footing, set the post in a 12-inch concrete footing below the frost line, and re-hang the gate to match the corrected position. The fix is a proper footing, not more hinges. We do this work regularly from Woodbridge to the older streets off Ballard.
It is largely a soil issue. When Wylie’s clay shifts a slide gate’s post, the rack and pinion run at an angle, and the teeth strip under load. Sandy-soil suburbs like Rockwall or Forney do not see this pattern nearly as often. We re-set the post, re-align the rail, and replace the rack if the teeth show wear. Then it stays fixed. Call (936) 274-8988 for an on-site look.
Yes. We weld the crack, grind the repair smooth, and match the finish to the existing gate. HOA aesthetic standards in Bozman Farm and Woodbridge matter, and we work within them on every job. The gate goes back looking like it was never touched. Free estimates at (936) 274-8988.
Call Ironworks Gate Co. for Gate Parts & Welding in Wylie
If your Wylie gate is sagging, dragging, or cracked at the welds, we will find out exactly why and fix it so it stays fixed. A live person answers the phone 24 hours a day, 7 days a week. Estimates are free, the price is settled before we start, and every job carries the 90-Day Done Right Promise in writing. Call (936) 274-8988 today.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Wylie since 1984.