Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Parker
If your Parker gate is sagging, grinding, or refusing to close, you need a crew that understands what these roads do to ironwork. Gate parts and welding in Parker is a different trade than it is in a subdivision with 50-foot lots. Here, gates are heavy, ornate, and hung 20 to 30 years ago on black-clay soil that never stops moving. We fix what that soil breaks: hinge posts out of plumb, latches that won’t line up, and operators fighting a gate that weighs more than the control board was ever designed to handle. Call (936) 274-8988 and a live person answers, day or night. We’ll tell you straight what’s wrong, what it costs, and whether it’s worth repairing or replacing. No voicemail tree, no runaround.
Why Ironworks Gate Co. Is Parker’s Preferred Gate Parts & Welding Company
Victor Salinas founded Ironworks Gate Co. in 1984, and the company has spent more than 42 years doing one thing: gates. Not fences, not general contracting, not “we also do gates.” Just gates. That focus matters in Parker, where the typical job is a 14-foot hand-forged swing gate that hasn’t been right since 2019 and every previous fix made it worse. Our Gate Parts & Welding team works on these every week, and we’ve seen the specific ways they fail. Parker homeowners who have lived in the same house for 20-plus years don’t want a technician who’s learning on their gate. They want someone who knows the difference between a bad limit switch and a hinge post that’s moved three inches out of plumb. We know the difference, and we quote it honestly before any work begins.
Every job carries our 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No paperwork, no arguing, no exceptions. That’s the Keystone Standard on every single job we do in Parker, from a simple roller swap to a full custom weld. Background-checked, uniformed technicians arrive when we say they’ll arrive, and they work in your driveway the way they would at their own mother’s house. The 400th job gets the same care as the first. That’s the K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it.
Our Gate Parts & Welding Services in Parker
We carry the full scope of gate parts and welding work, and in Parker we lean on the services that aging estate gates actually need most. Here’s what we do most weeks across Parker’s acreage streets:
Hinge Replacement
Heavy iron gates destroy hinges over time, especially on Parker’s shifting soil. We stock and install heavy-duty weld-on and bolt-on hinges rated for gates far heavier than what’s hanging on them. If your gate droops at the latch end but the post is still plumb, a hinge replacement and re-hang usually fixes it the same day.
Post Replacement
This is the big one in Parker. Black-clay soil heaves, shrinks, and shifts, and a 16-foot iron swing gate concentrates all that stress on one hinge post. We cut out the failed post, pour a new concrete pier extension, set the new post plumb, and re-hang the gate so it swings true. Skipping the re-setting step and only adjusting the operator is the most common cause of repeat failures we see from other companies’ work.
Rail Repair
Slide gates in Parker take a beating. The rail gets bent by mowers, struck by vehicles, or warped by years of heat. We repair and straighten existing rails, replace worn rack and pinion gears, and weld reinforcement where the rail meets the gate frame. If the rail is beyond saving, we’ll tell you that plainly and quote a replacement installed.
Custom Welding
You can’t buy a replacement picket for a 25-year-old custom iron gate at a hardware store. We weld. Custom picket replacement, cracked frame repair, decorative scrollwork restoration, latch reinforcement. Our welders match the existing metalwork so the repair disappears into the gate. For Parker’s estate gates, this is often the difference between keeping a hand-forged piece of ironwork alive and swapping it for a factory gate that looks wrong on the house.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Parker
Most Parker gates run on operators installed in the 1990s and early 2000s, and we service the brands we still see most on those old estates. If your gate runs on a LiftMaster, FAAC, BFT, or Linear operator, we carry the parts and know the control boards. We’re trained on nine major gate-automation brands, and we stock common boards, limits, and safety components locally so a Parker repair doesn’t wait a week on a shipping label. We’ll tell you honestly when a control board is still available and when it’s been obsolete for a decade and you’re better off replacing the operator than chasing used parts.
Common Gate Parts & Welding Problems We See in Parker Homes
- Hinge posts wandering out of plumb - Collin County’s expansive clay soil pushes posts around seasonally. The hinge post takes the worst of it because the gate’s full weight bears on that one anchor. Annual re-plumbing is not normal; a proper concrete pier extension fixes it for good.
- Obsolete control boards on 1990s-2000s operators - LiftMaster and US Automatic units from that era have boards that are no longer manufactured. We’ll source a tested used board when one’s available, but we’ll also give you the replacement price so you can make a real decision.
- Warped plastic limit-switch housings from summer heat - 105°F days cook the plastic internals inside older operators. The operator still runs, but it won’t stop where it should. We replace limits and housings with modern components rated for Texas heat.
- Sagging gates that overload working operators - A gate that droops from worn hinges or a shifted post makes the operator work three times harder than it should. That’s how a working motor becomes a dead motor. Fix the hinge and post first; the operator usually survives once the gate swings true.
Pricing for Gate Parts & Welding in Parker, TX
A typical hinge replacement on a standard residential swing gate in Parker runs $275-$475, depending on gate weight and how much re-hanging is needed. Post replacement with a new concrete pier extension runs $850-$1,400 for a single post on a heavy iron gate. Custom welding work is quoted by the job: a cracked frame repair is usually $200-$400, a full picket-pattern restoration on an ornamental gate runs $600-$1,200. Rail repair and rack replacement on slide gates typically runs $400-$800. Every price is discussed and agreed in writing before we pick up a welder. Estimates are free, and we honor a Free Second Opinion on any written estimate from another company. You’ll know the number before work starts, and that’s the number you’ll pay. Call (936) 274-8988 for an exact quote.
| Common Parker Repairs | Typical Price Range |
|---|---|
| Hinge replacement (standard swing gate) | $275-$475 |
| Post replacement with concrete pier | $850-$1,400 |
| Cracked frame weld repair | $200-$400 |
| Rail repair / rack replacement | $400-$800 |
| Full ornamental picket restoration | $600-$1,200 |
We Also Serve Cities Near Parker
Our crews serve Parker and the surrounding communities weekly. If you’re in Allen, Plano, Fairview, or Lucas, the same Ironworks Gate Co. team handles your gate parts and welding with the same 90-Day Done Right Promise. We schedule routes so a Parker resident on Country Club Road and an Allen homeowner get the same certified technicians and the same live-answered phone at (936) 274-8988.
Serving Parker, TX - Our Local Coverage Area
We’re based in the Parker area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Parker
Parker sits on Collin County’s expansive black-clay soil, which swells when wet and shrinks when dry. The hinge post on a long iron gate carries the gate’s entire weight, so the seasonal heave shows up there first. The permanent fix is cutting out the old post, pouring a deeper concrete pier extension, and re-setting the post so it stays put through wet and dry cycles. Adjusting the latch or operator alone won’t hold. Call (936) 274-8988 and we’ll inspect your post and tell you what a permanent fix costs.
In most cases we can replace just the hinge post and re-hang your existing gate. The gate itself is usually still solid; what failed is the anchor holding it. We cut the post free, weld in a new one set in a proper concrete pier, and re-hang the gate so the latch lines up. The exception is when the gate frame itself is rotted or cracked beyond safe welding, and we’ll show you exactly what we’re seeing before we recommend replacement. Most Parker estate gates from the 1990s and 2000s are worth saving.
No. We will not bypass or jumper safety photocells on any gate operator, and no reputable gate company will either. A gate without working obstruction sensors is a serious safety hazard, especially on a long iron swing gate. The honest answer is that control boards and sensors from that era are often obsolete, and the practical repair may be a modern operator with current safety components. We’ll quote both options: repairing what’s still serviceable, or replacing the operator with a modern unit. Call (936) 274-8988 for a straight answer and a written price.
If the gate binds or jumps mid-travel, the rack and pinion are already worn past the point where grease fixes anything. You can hear it: a rhythmic thunk or grind as the gate moves. The teeth on the rack wear unevenly in Parker because the clay soil shifts the concrete pad slightly each year, changing the mesh angle. A worn rack will destroy a new pinion gear quickly, so both should be checked together. We measure the wear and tell you exactly what’s serviceable. Estimates are free at (936) 274-8988.
No. If the operator still runs, the problem is mechanical, not electrical. The hinges have worn and the gate is sagging, which is making the operator strain against a gate that’s no longer swinging on its original geometry. We replace the hinges, re-hang the gate so it swings true, and the operator usually stops working so hard. Ignoring the droop will eventually kill the operator, which is a much more expensive repair. Fix the hinges now while the motor still has life in it. Call (936) 274-8988 for a quick hinge inspection and a written quote.
Get Your Parker Gate Fixed Right - Call Now
If your Parker gate is sagging, grinding, or shutting down on its own, call (936) 274-8988 today. A live person answers 24 hours a day, 7 days a week. We’ll schedule a service call at your Parker property, give you a written quote before any work starts, and back every repair with the 90-Day Done Right Promise. Ask about our standing offers: $50 off any repair over $250, a free second opinion on any written estimate, the $89 seasonal tune-up, and a 5% senior or veteran discount, always. Ironworks Gate Co. has been doing gates right for over 42 years, and we plan to be here for the next 42.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Parker and the surrounding area since 1984.