Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Richardson
Gate installation in Richardson runs $1,800 to $5,200 for a standard driveway gate with operator, and $850 to $2,400 for a pedestrian gate. Most projects take one to two days on site, with the concrete work scheduled first and the gate hung after the footings cure. Our crews know Richardson’s clay, Richardson’s HOAs, and Richardson’s mix of 1960s ranch gates and 1990s ornamental iron. If you’re planning a new driveway gate off Campbell Road or a replacement pedestrian gate in Canyon Creek, call (936) 274-8988 for Richardson Gate Access Control and we’ll walk the site with you before any number gets put on paper.
Why Ironworks Gate Co. Is Richardson’s Preferred Gate Installation Company
Victor Salinas founded Ironworks Gate Co. in 1984 and has spent forty-two years doing one thing: gates. Not gates plus roofing, not gates plus remodeling. Gates. That narrow focus is why Richardson homeowners keep our number. We answer the phone with a live person, send a background-checked tech in a marked truck, and put the price in writing before a single bolt turns.
Richardson’s housing stock makes this work harder than most towns. The 75080 and 75081 zip codes are full of 1960s ranch homes where cedar gate posts have been sitting in Blackland clay for forty years and the base has turned to sponge. The 75082 side is different: planned HOA subdivisions from the Telecom Corridor era, ornamental iron gates with automatic operators now hitting twenty-five years old. We stock parts for both cohorts on our trucks. A tech rolling into Richardson should not have to drive back to the yard twice for a wood-post bracket or a LiftMaster limit switch. Ours do not.
Our Gate Installation Services in Richardson
Driveway Gate
A driveway gate in Richardson has to survive three things: clay that heaves, heat that warps, and ice that snaps. We set every post in concrete piers deep enough to reach stable soil below the Blackland clay’s expansion zone, typically forty-two to forty-eight inches. Then we hang the gate with adjustable hinges so a season of shrink-swell does not bind it shut by March. Most Richardson driveway gates we install run $2,400 to $4,800 for ornamental steel with an automatic opener.
Pedestrian Gate
Pedestrian gates along Arapaho Road and Belt Line frontages get a lot of use and very little maintenance. We build them to open and close two hundred times a week without sag. For the ranch neighborhoods, that often means replacing the original cedar post with a powder-coated steel post set in concrete, then hanging a lighter aluminum gate that will not pull the hinges out of square. Expect $850 to $1,900 for a complete pedestrian gate replacement in Richardson.
Sliding Gate
Sliding gates are the answer for long, flat driveways on Richardson’s east side, where a swing gate would need to clear a wide concrete apron and a mailbox. The catch is that steel slide-gate tracks in Richardson bind in summer when thermal expansion closes the clearance gap. We install roller systems and rack-and-pinion tracks with expansion joints built in, and we set the gate’s travel limits with extra tolerance for a 105°F July afternoon. A powered slide gate on a 75082 driveway typically runs $3,600 to $5,200 installed.
Swing Gate
Swing gates on a double driveway give a wide opening without the track maintenance of a slide gate, but they demand level posts and strong hinges. In Richardson’s 75080 and 75081 neighborhoods, the old cedar hinge posts are usually the first thing to fail. We replace them with steel and weld the hinge plates instead of lag-bolting them. For a double swing gate with an operator on a ranch-lot driveway, plan for $2,800 to $5,000 depending on gate width and material.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richardson
We install and service operators from LiftMaster, FAAC, and BFT, and our techs carry the common parts for each on the truck. That matters in Richardson because a February ice storm can wipe out a dozen HOA gate operators in one night, and the parts backlog can run six to eight weeks. When a Gate Installation customer off Renner Road needs a FAAC board or a LiftMaster limit switch, we do not want them waiting on a distributor. Our Richardson customers get parts from our local stock, and the job is protected by the 90-Day Done Right Promise in writing.
Common Gate Installation Problems We See in Richardson Homes
- Clay heave on hinge posts. The Blackland Prairie clay under Richardson swells with spring rain and shrinks in August drought. A gate post set in a shallow footing will lean out of plumb within two or three seasons, and then the gate drags or will not latch. We pour piers below the movement zone, and we use steel posts where the old cedar has rotted at grade.
- Ice-storm operator failures in HOA communities. When the February 2021 freeze hit, ice loaded on ornamental iron gates across 75082 and snapped limit switches or bent slide-gate tracks overnight. Operators that were never adjusted for cold-weather torque stripped their gears. We set up Richardson HOA customers with cold-weather calibration and hardened track systems before the next storm cycle.
- No grid power at the gate. Many 75080 and 75081 ranch lots have gates set two hundred feet or more from the house panel. Running conduit that distance is expensive, and the alternative is solar. Solar openers work in Texas sun, but they fail when panel angles drift or batteries cook in 105°F heat. We size solar arrays for Richardson’s heat load and mount panels so they hold their angle through a storm.
- Wood gate sag at the hinge side. A cedar or pine gate that soaks up Richardson humidity and then bakes in the sun will twist. We install steel frame inserts or replace the gate leaf with a welded aluminum panel that will not rack, and we pair it with adjustable hinges rated for the leaf weight.
Pricing for Gate Installation in Richardson, TX
Here is what Richardson homeowners actually pay. A standard single driveway swing gate with an automatic opener runs $2,400 to $4,800. A sliding gate on a steel track runs $3,600 to $5,200. A double gate, which means two leaves and a paired operator system, runs $4,200 to $6,500. A pedestrian gate replacement is $850 to $1,900. If the job needs solar power, add $600 to $1,400 for a properly sized panel and battery bank. Every price is quoted and agreed before any work starts. You will see the number, you will approve it, and that is the number on the invoice. Call (936) 274-8988 and we will come measure at no charge and put a written estimate in your hand.
We Also Serve Cities Near Richardson
Ironworks Gate Co. serves homeowners across Richardson and the surrounding communities, including Plano, Sachse, Allen, and Wylie. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with crews serving Richardson locally. If you are a few minutes outside the city line, call (936) 274-8988 and we will confirm we cover your street.
Serving Richardson, TX - Our Local Coverage Area
We’re based in the Richardson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Richardson
The Blackland clay under Richardson’s older ranch neighborhoods expands and contracts with every seasonal rain and drought cycle, and the original cedar posts from the 1960s and 1970s were buried in shallow holes that sit right in the movement zone. Within two or three years of a new install, a post that was not set on deep concrete piers will lean, and the gate will drag or fail to latch. We set steel posts forty-two to forty-eight inches deep, below the expansion layer, and weld the hinge plates. Call (936) 274-8988 for Gate Repair - Richardson if you have a leaning post and want it fixed before it gets worse.
Yes. We install solar-powered slide gate operators on long driveways where the gate sits too far from the house panel for a realistic conduit run. The system uses a solar panel sized for the operator’s amp draw plus a deep-cycle battery bank, and we mount the panel at an angle that stays clean through Richardson’s dust and storms. Lithium batteries handle the 105°F summer heat far better than lead-acid. For an exact quote on a solar slide gate in 75082, call (936) 274-8988.
A heavy-duty slide or swing operator rated for 1,000 pounds or more is what a 16-foot livestock gate near Renner Road needs. We typically install LiftMaster or FAAC units sized for constant daily cycling, not the light-duty residential operator a homeowner might find at a box store. Livestock gates take abuse, and the operator must have adjustable force limits so a cow leaning on the gate does not burn the motor. We can spec the right unit after a site visit. Call (936) 274-8988 and we will come measure it.
In the HOA communities of eastern 75082, the February 2021 ice storm loaded gates with enough frozen weight to snap limit switches, bend slide-gate tracks, and strip the gears in older door operators that were never calibrated for cold-weather torque. A gate that will not close after a freeze usually has a bent track or a failed limit switch. We keep LiftMaster and Linear Gate Parts & Welding in Richardson on hand specifically because Richardson’s ice-storm parts backlog runs six to eight weeks after a bad event. Call (936) 274-8988 and we will diagnose it.
You stop the post from moving and you stop the gate from twisting. We replace the original wood post with a steel post set on a concrete pier below the clay movement zone, weld the hinge plates instead of bolting them, and install an anti-sag frame kit or a steel insert inside the gate leaf so the gate itself cannot rack. Richardson’s humidity-swelling and summer-baking cycle will tear up a gate that is just lag-bolted to a cedar post. Call (936) 274-8988 for a free site visit and a written price.
Looking for a gate installer in Richardson who will put the price in writing, set the posts below the clay, and stand behind the job? Call Victor Salinas and the Ironworks Gate Co. team at (936) 274-8988. We will come out, measure, and hand you a written estimate. The price you approve is the price you pay. Every job is protected by the 90-Day Done Right Promise.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Richardson since 1984.