Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across McKinney
A new driveway gate in McKinney typically runs $2,800 to $7,500 for a standard single swing gate with automation, while sliding gates for tighter lots and shared driveways land between $4,200 and $9,000 depending on track length and operator choice. We quote every job before work begins, and we’ve built gates across every ZIP in this city, from the 2000s-era HOA communities west of Custer Road to the older lots nearer downtown McKinney. Call (936) 274-8988 and a live person answers, any hour you need us.
Gate installation here is not a one size fits all job. The lot drives the design. A wide double gate on a two acre estate off Eldorado Parkway needs different engineering than a single pedestrian gate squeezed between a fence line and a garage wall in a Stonebridge Ranch alley lot. Ironworks Gate Co. has served McKinney homeowners for decades because we plan around the site before we ever set a post. We know this city’s HOAs, its clay soil, and its driveway layouts. That local knowledge keeps your project from stalling on a committee desk or digging into a rework cycle two years later.
Why Ironworks Gate Co. Is McKinney’s Preferred Gate Installation Company
We’ve worked enough jobs in McKinney to know the difference between a gate that looks right and one that will still close square after five North Texas drought summers. Our Gate Installation crews have set posts in the blackland clay of Stonebridge Ranch, built sliding gates on shared driveways in Trinity Falls, and replaced rotted wood gates on the older lots near Historic Downtown McKinney. We show up with the right footing depth, the right hardware, and the right paperwork for your neighborhood’s architectural review.
Victor Salinas runs our crews, and he’s built this company around one idea: do the job so the homeowner never has to think about that gate again. Our techs arrive in uniform, background checked. The price is settled before we touch a drill. If something isn’t right, our 90-Day Done Right Promise is in writing. No arguing. We come back and make it right. That’s why McKinney homeowners who have been burned by fly by night installers call us instead of rolling the dice on a handyman.
Our Gate Installation Services in McKinney
Driveway Gate Installation
Most McKinney driveway gates go on lots built between 2000 and 2020, where the original ornamental iron or aluminum gate is now sagging or failing at the hinge welds. We install single and double driveway gates sized to your opening, with automatic operators from LiftMaster, FAAC, or BFT. On a typical 75070 lot, a new powder coated steel driveway gate with automation runs $3,200 to $6,800 installed.
Pedestrian Gate Installation
We build walk through gates for side yards, HOA trail access, and fence line entries. These are smaller jobs but they need the same care at the hinge plate and the same proper post footings. In McKinney’s clay soil, a shallow pedestrian gate post will lean within two years. We pour footings deep enough to outlast the fence line.
Sliding Gate Installation
Sliding gates are the right answer for a lot of McKinney driveways, especially the narrower shared drives in 75070 and 75071 where a swing gate’s arc blocks the sidewalk, the neighbor’s access, or the garage approach. We build cantilever and track style sliding gates in steel or aluminum, with operators matched to the gate’s weight and cycle count. A sliding gate on a shared Stonebridge Ranch driveway typically runs $4,800 to $9,000 depending on length and automation.
Swing Gate Installation
Swing gates remain the most common style in McKinney, particularly the double leaf ornamental gates on larger lots in Craig Ranch and Willow Wood. We hang them on adjustable hinges and set posts in concrete footings engineered for expansive clay. A properly hung swing gate on fresh footings should close true for twenty years. We build to that standard.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in McKinney
We’re trained and equipped on nine gate automation brands, and for McKinney jobs the ones we see most often on existing equipment are LiftMaster, FAAC, and BFT. When we install a new gate, we match the operator to your gate’s weight class, how many cycles a day it runs, and whether you need battery backup for North Texas storms. Because we stock common parts for these brands, we don’t leave a McKinney driveway waiting on a part shipped from out of state. We bring what we need on the first trip.
Common Gate Installation Problems We See in McKinney Homes
- Post footing heave on expansive clay. McKinney sits on Collin County blackland prairie clay that swells in wet seasons and shrinks during drought. A post set at 24 inches will move. We set gate posts at 36 inches minimum, with rebar and concrete, so the gate stays plumb when the ground moves underneath everything else in the yard.
- Swing gates that block a shared driveway. In 75070 and 75071, many lots are tight and the driveway is shared with a neighbor or split by a narrow approach. A swing gate’s arc eats four to six feet of driveway space every time it opens. We flag this early and recommend a sliding gate where it fits the lot and the HOA’s design standards.
- Skipping the entrapment protection. An automatic gate without a photocell or safety edge is not UL 325 compliant, full stop. On a McKinney street with kids walking to school or a neighbor’s dog on the loose, that’s a liability nobody should carry. We install edge sensors and photo eyes on every automatic gate we set.
- HOA rejection after the fact. We see this constantly in Stonebridge Ranch and other governed communities. A homeowner installs a gate, the architectural review board flags the finish or the panel style, and now they’re refacing a brand new gate at their own cost. We help you prep the submission before we start so the first approval is the only approval.
Pricing for Gate Installation in McKinney, TX
A standard single swing driveway gate with an automatic opener in McKinney runs $2,800 to $6,500. A double swing gate on a wider driveway is $4,500 to $8,500. Sliding gates for tight lots or shared drives run $4,200 to $9,000. A basic pedestrian gate without automation is $800 to $1,800. What moves the number: gate length, material (steel versus aluminum), whether we’re pulling new low voltage wire, and whether your HOA requires a specific finish or panel profile. Every quote is line item and settled before we order a single part. We don’t surprise you at the end. Call (936) 274-8988 and we’ll come measure the opening, check the soil, and give you a written price.
We Also Serve Cities Near McKinney
Our crews work throughout Collin County. If you’re in Princeton, Allen, Prosper, or Frisco and need a gate installed, you’ll get the same crew, the same written Done Right Promise, and the same respect for your property. We coordinate dispatch from our Dallas Fort Worth office and route local crews to McKinney neighborhoods every week. The drive is short. The standard doesn’t change.
Serving McKinney, TX - Our Local Coverage Area
We’re based in the McKinney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in McKinney
Yes, in nearly every case. Stonebridge Ranch and most master-planned communities in 75070 and 75071 require architectural review submission with photos, material spec sheets, and a paint or powder coat code before any gate work begins. We help McKinney homeowners prepare that submission, and we’ve built enough gates in these communities to know exactly what the committees look for: matching the existing fence line, no exposed galvanized hardware, and an operator that doesn’t alter the streetscape. Call (936) 274-8988 and we’ll walk you through the submittal before you spend a dollar.
We dig post holes to 36 inches or deeper, set the post in concrete with rebar reinforcement, and use a bell shaped footing where the clay is most expansive. McKinney’s blackland prairie soil shrinks and swells enough to move a shallow post two inches in a single wet winter, which is why we never set gate posts at fence post depth. For heavy sliding gates and double swing gates, we sometimes go deeper and add a steel post sleeve. This is standard on every McKinney install, not an upgrade.
A sliding gate is usually the best answer. On the tight shared driveways common in 75070 and 75071, a sliding gate runs parallel to the fence line instead of swinging into the driveway, so you keep your vehicle access and your neighbor doesn’t lose room. We also sometimes build a low profile cantilever slide where a track would be a trip hazard. Each option depends on your lot’s side clearance. We measure first and show you what fits. Then we quote it in writing.
Yes. Automatic gate operators must meet UL 325 entrapment protection standards, which means photo eyes, safety edges, or both, depending on the gate type and operator class. This is federal safety law, enforced regardless of what city you’re in. We include compliant sensors on every automatic gate we install in McKinney, and we test them before we leave. Never let an installer skip this to save a few hundred dollars.
Usually not. In McKinney’s expansive clay, a sagging post is almost always a footing problem, not a hinge problem. We won’t hang a new gate panel on a post that has moved out of plumb, because the new gate will drag and fail within a season or two. We’ll pull the old post, pour a proper 36 inch footing, and set a new post or sleeve the existing steel. That’s the difference between a gate that lasts twenty years and a gate you’re adjusting every spring. Call (936) 274-8988 and we’ll give you a straight answer on whether that old iron is worth saving.
Get Your McKinney Gate Installed Right
If you live in McKinney and you’re planning a gate, call us before you sign anything. Victor Salinas and the crews at Ironworks Gate Co. will help you with the HOA paperwork, engineer the post footings for this clay, and build a gate that closes square for decades. We quote the price before we start. We stand behind the work in writing. Call (936) 274-8988 for a free estimate, or ask about our $50 off any repair over $250 and our permanent 5% senior and veteran discount. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving McKinney with dedicated gate installation, repair, and automation expertise.